ev07 Double Cartridge Outside mounted.

A factory assembled, pressure tested, multi spring outside mounted double cartridge seal. Designed to handle extreme shaft runout. Ideal for agitators and mixers.

Features and Benefits

  • Springs are isolated from pumped product to eliminate clogging.
  • Requires no stuffing box.
  • Engineered to withstand extreme shaft runout.
  • Stationary seal design removes vast vibration/harmonic problems.
  • Cartridge designed for easy installation.
  • Pressure tested for assurance before leaving Robco’s facility.

Technical Data and Dimensions

All standard dimensions will be customized to fit your application.
INCHES
CODE SIZESHAFT SIZESEAL OUTBOARD DISTANCEROTARY SEAT
OUTBOARD DISTANCE
GLAND OUTBOARD DITANCE.375 BOLT.500 BOLT.625 BOLT
  BCDBolt CircleBolt CircleBolt Circle
0080.5001.8751.7504.0002.5002.750 
0100.6251.8751.8754.0002.6252.875 
0120.7501.8752.0004.0002.7503.000 
014.08751.8752.1254.0002.8753.125 
0161.0001.8752.2505.0003.0003.250 
0181.1251.8752.6755.0003.1253.375 
0201.2501.8752.5005.0003.2503.500 
0221.3751.8752.6255.5003.3753.625 
0241.5001.8752.6255.5003.3753.625 
0261.6251.8752.8755.5003.6253.875 
0281.7501.8753.0006.0003.7504.000 
0301.8751.8753.1256.0003.8754.125 
0322.0001.8753.2506.0004.0004.250 
0342.1251.8753.3756.5004.1254.2504.500
0362.2501.8753.5006.5004.2504.5004.750
0382.3751.8753.6256.5004.3754.6254.875
0402.5001.8753.7506.5004.5004.7505.000
0422.6251.8753.8757.0004.6254.8755.125
0442.7501.8754.0007.0004.7505.0005.250
0462.8751.8754.1257.0004.8755.1255.375
0483.0002.1564.2508.0005.0005.2505.500
0503.1252.1564.3758.0005.1255.3755.625
0523.2502.1564.5008.5005.2505.5005.750
0543.3752.1564.6258.5005.3755.62585.875
0563.5002.1564.7509.0005.5005.5706.000
0583.6252.1564.8759.0005.6255.8756.125
0603.7502.1565.0009.5005.7506.0006.250
0623.8752.1565.1259.5005.8756.1256.375
0644.0002.1565.25010.0006.0006.2506.500
0664.1252.1565.37510.0006.1256.3756.625
0684.2502.1565.50010.5006.2506.5006.750
0704.3752.1565.62510.5006.3756.6256.875
0724.5002.1565.75011.006.5006.7507.000
0744.6252.1565.87511.0006.6256.8757.125
0764.7502.1566.00011.5006.7507.0007.250
0784.8752.1566.12511.5006.8757.1257.375

SIZES: Metric and sixteenth seals available against specific orders. Larger shaft diameters available against speficic orders.

Operating Specifications

Temperature limit:
-40 C to 205 C
-40 F to 400 C
Temperature limit is based on standard elastomer.
Pressure limit to: Vacuum to 17.01 kPA (250 psi)
Shaft speeds to: 3,600 rpm

Standard Material Construction

Metal Components: 316SS

Stationary
Face: Chemical Grade Carbide
Optional: Chrome Oxide Coating, Tungsten Carbide

Rotating
Seat: 17.4 PH SS (Heat Treated)
Optional: Chrome Oxide Coating, Silicon Carbide

Total Warranty

All Robco seals are manufactured to exact standards, and are guaranteed free of defects in materials and workmanship. All seals are guaranteed for 90 days from delivery, excepting negligence, misuse and abuse, and will deliver at our expense a new seal to replace any seal found to be defective within said period. No registration card is required.

The warranty is expressly in lieu al all warranties, expressed or implied, and of all obligation or liabilities on our part, including any liability for incidental or consequential damages.

Disclaimer

The temperature limits, pH ranges, pressure ratings, feet per box and shaft speeds shown throughout this pamphlet are representative; the service life and performance of these products can be affected by elevated temperatures and other operating conditions such as chemical resistance, shaft speeds, pressure and equipment in which that the product is being installed. The ratings supplied are suggested as a guideline and should only be used for evaluating your specific application. When in doubt, contact Robco or your ENVIROPAK distributor. The information contained in the pamphlet should not be considered to be a warranty, expressed or implied, including, but not limited to, a warranty of merchantability or fitness for a particular purpose. In no event shall Robco be liable for any incidental or consequential damages resulting from the use, misuse or inability to use the products. This exclusion applies regardless of whether such damages are sought based on breach of warranty, breach of contract, negligence, strict liability in tort, or any other legal theory.

All Robco mechanical seals are manufactured, assembled and tested in America.