Features and Benefits
- Unique, heavy duty single spring design resists clogging in abrasive applications.
- Can be balanced to withstand extreme pressure.
- Designed to give up equal face load during operations.
- Positive spring drive to withstand extreme torque from applications that may crystallize.
- Available also in cartridge design (EV05).
Technical Data and Dimensions
|Shaft Size Decimal||shaft size Code||a||b|
SIZES: Metric and sixteenth seals available against specific orders. Larger shaft diameters available against speficic orders.
-40° F to ﹢400° F ( -40° C to +205° C)
based on standard elastomers
Pressure Limit: Vacuum to 250 psi
Shaft Speed: 3600 rpm
Standard Material Construction
Metal Components: 316SS
Face: Chemical Grade Carbon or Tungsten Carbide
Elastomer: Standard Industrial Components (other materials avaialable upon request)
Notice: To determine the type of spring required, look into the stuffing box from coupling end. Clockwise shaft rotation requires a right-hand wound spring. Counter-clockwise rotation requires a left-hand wound spring.
All Robco seals are manufactured to exact standards, and are guaranteed free of defects in materials and workmanship. All seals are guaranteed for 90 days from delivery, excepting negligence, misuse and abuse, and will deliver at our expense a new seal to replace any seal found to be defective within said period. No registration card is required.
The warranty is expressly in lieu al all warranties, expressed or implied, and of all obligation or liabilities on our part, including any liability for incidental or consequential damages.
The temperature limits, pH ranges, pressure ratings, feet per box and shaft speeds shown throughout this pamphlet are representative; the service life and performance of these products can be affected by elevated temperatures and other operating conditions such as chemical resistance, shaft speeds, pressure and equipment in which that the product is being installed. The ratings supplied are suggested as a guideline and should only be used for evaluating your specific application. When in doubt, contact Robco or your ENVIROPAK distributor. The information contained in the pamphlet should not be considered to be a warranty, expressed or implied, including, but not limited to, a warranty of merchantability or fitness for a particular purpose. In no event shall Robco be liable for any incidental or consequential damages resulting from the use, misuse or inability to use the products. This exclusion applies regardless of whether such damages are sought based on breach of warranty, breach of contract, negligence, strict liability in tort, or any other legal theory.
All Robco mechanical seals are manufactured, assembled and tested in America.